How to build a dog house! My first experience 5
Added 2022-10-29 23:49:13 +0000 UTCThe entrance wall is made of boards, the inlet is along the contour, all the boards are fixed with self-tapping screws. It looks uneven at first, and if you do it completely along the line, then at this stage something even can come out. But this is not the case, so I fixed the boards on the other side with the remnants of the OSB panel (Pic 2), cut it with a jigsaw and sharpened it with a grinder. For evenness, the edges were sheathed again with clapboard (pic 3, you can see the sides in comparison). This step is not obligatory if everything is done carefully from the beginning. I added a frame from a bar on top - the outline of the roof on this side. All new parts are brushed and treated with tar. Dogs are trying on. The next task is the roof
