Flexi Factory Shark
Added 2023-03-19 17:39:24 +0000 UTCFor those of you who want to print a massive shark!
The big one in the picture is 220% (printed on the Bambu) the little ones 50% and 60%
I don't suggest using the curved if you're printing small because the tolerances are a little tighter.
Here is the Filament Link (ZIRO Translucent Winter, TTYT3D silk gold, and SUNLU Silver):
https://www.amazon.com/shop/flexifactory/list/A1EM0DT4144J?ref_=cm_sw_r_cp_ud_aipsflist_aipsfflexifactory_H8P2FZYRSCA0D27RHDP4
-Dan
Comments
I did not make a no eye version
Dan
2024-10-03 16:23:05 +0000 UTCDo you have a version of this shark without eyes?
Greg Priebe
2024-10-03 12:23:38 +0000 UTCscusate ma non trovo il link per il download...
Kermit77
2023-10-09 17:20:42 +0000 UTCThank you this is so help full
2023-04-02 20:43:44 +0000 UTCIt would :)
Dan
2023-04-02 20:12:52 +0000 UTCNo supports needed on any of my models :)
Dan
2023-04-02 20:12:37 +0000 UTCdo you hjave to use supports on this
2023-04-02 15:26:59 +0000 UTCWould it be possible to make a skeleton snake using this style?
Tony Sullivan
2023-04-02 14:51:16 +0000 UTCTTYT3d: https://a.co/d/9QtqFJX
Dan
2023-03-28 13:08:03 +0000 UTCwhat is the gold filament been looking for one that looks real
Shannon Patterson
2023-03-28 06:07:53 +0000 UTCYou have to resize the file to the size you want to print.
Dan
2023-03-26 22:47:11 +0000 UTCquestion is this file the bigger shark or do I have to make it bigger?
2023-03-26 22:35:16 +0000 UTCJust did my first shark. Amazing
2023-03-26 01:36:20 +0000 UTCIt's on my list. I have some fun skeleton designs in the future.
Dan
2023-03-24 12:54:00 +0000 UTCBought the same winter filament and finishing a 150% shark…LOVE!!!
2023-03-23 02:30:33 +0000 UTCany plans on doing some dino skeletons ?
William Fridley
2023-03-23 01:52:54 +0000 UTCMy .4 has clogged twice on the last few mm of the shark fin. Almost the same place. Maybe I should leave the door open.
Brian Mettlen
2023-03-22 22:21:49 +0000 UTCI use .4. For the bambu, I don't change any heat settings. I print at .12 layer height for single color and .16 for multi. I do not change the type of filament in the slicer. Just Bambu Plain PLA. It generally heats to right at 220 while printing, and around 240 when it's purging. No clogs for me yet. But I have had it stop due to the chute being full.
Dan
2023-03-22 22:03:42 +0000 UTCHey Dan. What nozzle temp and size are you printing the GiTD? I've now clogged 2 .4 nozzles and a .6 nozzle on my bambu. Do I need it hotter than normal?
Brian Mettlen
2023-03-22 21:53:17 +0000 UTCThanks so much for sharing your filament as soon as i saw 220% shark in that transparent winter blue i brought it immediately. Printing my own shark in that color at 220%. The bridge ovwehang on the spine has me worried at this size but i turned on thick bridges to help.
ChellaBellem3D
2023-03-22 21:34:04 +0000 UTC
