Bonus: Flexi Factory Knights Accessory Pack...and Stand!
Added 2023-04-22 00:13:30 +0000 UTCHappy Frayay...as my nine year old likes to say! Wanted to get these out for you folks that might be doing shows this weekend. The solid colors print pretty quick.
I added a stand and a bunch of different accessories. They work for both the Public Release: Knight and the Exclusive: Skeleton Knight!
Hope everyone has a wonderful weekend. It's Fiesta time here. So that means I will be staying very far away from downtown San Antonio and working on my next designs. :-) Dan
BONUS DOWNLOADS are HERE!!! https://www.patreon.com/posts/bonus-files-here-88548096
Comments
As always, another amazing design!
PATCHTECH3D
2025-02-10 19:25:58 +0000 UTCHello. The Knight is an older public release. I do have the link and 40% off code to use at My Mini Factory in the 2nd to top post :)
Dan
2023-08-02 19:45:20 +0000 UTCwhere can i find the files for the knight?
Jonathan Chapman
2023-08-02 13:04:56 +0000 UTCYou should try printing the weapons and the stand and or shield separately depends on how it is colored. It may also be specific filament. I have had issues with a few colors in the past.
Dan
2023-05-07 20:50:04 +0000 UTCprinted this using the bambu files and got a LOT of string. I think it's trying to print the tower when you are done using the other colors, but all over the weapon holder.
2023-05-03 19:50:42 +0000 UTCThe handles are different, so I am not sure they will work. I assume smaller than your teddy bear, but not sure about how much.
Dan
2023-05-02 23:29:38 +0000 UTCIf I want to use them for the teddy bear what percentage do you recommend printing them at?
Cindi Ward
2023-05-02 16:55:54 +0000 UTCYes, little late to party here, but I have been making "minis", Knight, Skeleton Knight, Astronauts, all have moving parts no problem at 55%, I havent tried any smaller yet but running them at 0.10 layer height on prusa minis. Could probably go a bit smaller yet, I havent even touched a .25mm nozzle or 0.07 layer height. long story short, if you want to make smaller prints, use finer layers/nozzles.
Alexander Ramaker
2023-04-30 00:48:47 +0000 UTCHi there. I print with .12 layer height for solid colors and .16 for multi-color on the Bambu. Yes, I would suggest changing that. Takes longer, but you will have a cleaner print :)
Dan
2023-04-26 14:49:41 +0000 UTCI printed Skeleton Knight in 60 and 70% scale with 3walls, 15% of infill and layer height of 0.2mm, but the helmet is not moveable. in your old post, as I remember, you mentioned you printed the knight in 60% scale and every parts were working. what am i missing? should I print in smaller layer height? help me :(
2023-04-26 06:24:57 +0000 UTCPlease send me a photo and some printer info...I can help troubleshoot. Flexifactory@gmail.com
Dan
2023-04-25 00:06:45 +0000 UTCNo matter where a put the single axe it won’t print🥲
Denise Mohr
2023-04-25 00:03:29 +0000 UTCI made these and they are awesome. Thinking we now need a flexi horse with body armour for the knight.
Greeneyes
2023-04-24 12:20:41 +0000 UTCI am SO happy with these! Probably my favorite addition/bonus! Thank you!
Don Fief (aka SwagDad)
2023-04-23 21:28:26 +0000 UTCOMG Castle Grayskull would totally have my vote!
2023-04-23 19:17:58 +0000 UTCohhhhh you so have to now after that teaser!!!!!!
Caltrout94
2023-04-23 18:13:13 +0000 UTCThe holder and weapons are for both. But possibly a bonus down the line. Something a little more Castle Grayskull???
Dan
2023-04-23 17:09:07 +0000 UTCNow we need an accessory holder for the skeleton knight.
Denise Lindstrom
2023-04-22 19:25:35 +0000 UTCVery nice add-ons. Thank you very much.
Randy Gifford
2023-04-22 18:20:51 +0000 UTC
