Exclusive: Flexi Factory Skeleton Frog is HERE!!!
Added 2024-10-02 22:55:52 +0000 UTC
Exclusive Models discount code here: https://www.patreon.com/posts/116519946
When I told my wife I wanted to put this skeleton frog on the poll she asked me "Have you seen a frog skeleton? they are UGLY"🤣
With that sentiment I knew I had to keep the fun and cute feel of my original frog.
So before anyone asks if this little guy is anatomically correct, Heeeck No...It's Art.😉
Like usual, I have an eye and a no-eye version.
Print tips and Info:
I test between 50% and 150% for functionality. BUT... I do not suggest smaller than 60% for this model. The links and footprint are tiny so detail will be lost and it could lead to failures. High quality materials and settings should be considered the smaller you go.
STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.
Make sure you have good adhesion. I always use a glue stick
Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory
1st photo is 150% STL in Amolen Rock PLA Yellow Feldspar
(My new favorite filament for skeletons)2nd photo STLs are 60% baby frog in Ziro Matte Beach and 100% in Ziro Matte Rainbow Blaze
3rd photo 100% stl in Ziro Matte Tropical
4th-7th Photos are 100% 3mfs in CC3D Marble Stone and Ziro Matte Tropical and 60% Stls in Ziro matte Tropical
Happy Wednesday and Happy Printing -Dan
*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :)
Comments
Thanks for getting back to me. I’ve tried multiple ways. I use orca slicer and I’ve also used a Persa stopped it before the cover-up manually stopped it two stops before the cover-up and still no work so I increased the size by 5% and everything works fine thank you so much for getting back to me. Just thought I would give you an update on the issues I might be having also on another notekeychains and magnets. That’s my thing so the more the merrier.
Ray Odeneal
2025-05-04 22:05:09 +0000 UTCGood morning. I apologize, there was a link in the mini frog post with the magnets that I purchased. I do use the 6x2 size. Ther is some space around it, but you would drop it in with a layer pause and they work great!
Dan
2025-05-04 12:54:19 +0000 UTCDan, I’ve been with you for a while now on the mini frogs magnet version captured. I can’t find any reference to the size of magnet you used. I tried six by twos and they didn’t quite fit to snug.
Ray Odeneal
2025-05-03 19:05:56 +0000 UTCIn the post at the bottom. Files are attached
Dan
2024-10-15 15:32:21 +0000 UTCNo supports ever needed
Dan
2024-10-15 15:31:54 +0000 UTCSupports or no supports?
Brian Colvin
2024-10-15 09:39:12 +0000 UTCI'm not seeing the file? Where is it? Thanks
RandM
2024-10-11 03:42:04 +0000 UTC
