BABY AXOLOTL

https://www.patreon.com/posts/little-baby-79395071?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link In this version there is the 3mf file, I am making the 3mf file of the older models

zou 3d

Is there a multi material file for this item? :)

Jordan Dukeman

this has consistently been a best seller for me at my craft shows. The sales alone on this design pays for your monthly Patreon. Thanks for a great design!

Terri Trōtter

Awesome looking forward to it!

Makers Ace

Yes! will be released this month

zou 3d

would it be possible to make a keychain version of this similar to the keychain version of the alligator?

Makers Ace

i have just got these little guys into my local candy and sweets shop we are very excited here at Coastal Kustom Creations as our business Continues to grow and this little axo is where it all starts . A big thanks to all the team and ZOU 3D for your tremendous Work

William Hargraves

The print was partially coming off of the build plate. Just the rear tail section, to be specific. I applied Magigoo to the build surface, and that solved the issue. I've never needed to do that on my textured build surface, but I think the surface area that contacts the build plate is just a bit too small to hold the part otherwise.

Most of the build sticks, it just seems half way through the tail loosens then messes up

Is your printer coming off the build plate or printing wrong? let's investigate this

zou 3d

Is your printer coming off the build plate or printing wrong? let's investigate this

zou 3d

Try some Aqua Net hair spray on the build plate. It fixed my issue with this and other prints that had the same issue. My main build plate is a textured PEI with Aqua Net.

Brian VanDeKeere

I am having the same issue on my ender 3 v2 what was everyone's solution? I got 3 to print initially but since then had half a dozen fail.

I have the same issue with my CR10S pro V2, using Prusaslicer. The rear section of tail breaks loose from the bed and wobbles around during the end of the print, ruining it.

yes use prusa not cura, there are profiles for the ender3 s1 pro on prusa and there stock profile will most defiantly are better than cura's are . i print these on a 0.24mm layer height in 1 hour and 37 minutes . these are a amazing little model my guess is, the couple little errors in the model your version of cura cant pick up where the newest version of prusa does and is able to repair them and they print wonderfully

William Hargraves

This must be something in the Z axis structure, when this happens with some of my printers I tighten the screws and apply some lubricant to the moving parts

zou 3d

I can't print this... I bring it into Cura and slice it and everything looks great... but when I print it on my Ender 3 S1 Pro... about 3/4 of the way thru the tail goes nuts. Does anyone have a brilliant suggestion?

Frank Ayre

usually i use these settings layer height - 0.2 mm wall thickness - 1.2mm Infill - 20%

zou 3d

What are the recommended print settings for the baby?

Omg LOVE!!!! And I’m so excited for the ghost!!!! I love cute creepy thinngs

Nastassia Zamora