🖨️ TEST PRINT - LUFFY x ZORO x SANJI (WELCOME PACK) 🖨️
Added 2025-02-18 14:42:36 +0000 UTCThe final piece of the Welcome Pack is here! 🔥
You can grab all the models from the Welcome Pack right here—they’re pre-supported and ready to print!
For those setting up their printers, here’s a base configuration you can use as a reference. Make sure to fine-tune the settings to match your machine! 👇
🟢 Anycubic Mono X2
Layer Height: 0.05 mm
Normal Exposure: 2.5s
Bottom Exposure: 30s
Bottom Layers: 5
Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)
Lift Distance: 5mm (bottom), 5mm (normal)
🔵 Elegoo Mars 2 Pro
Layer Height: 0.05 mm
Normal Exposure: 3.0s
Bottom Exposure: 35s
Bottom Layers: 5
Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)
Lift Distance: 5mm (bottom), 5mm (normal)
⭐️ Test Print by @renegat3d
Now it’s time to fire up those printers and bring these models to life! 🚀✨
Show off your prints, get feedback, and connect with the community here:
Can’t wait to see your creations! 🔥
Comments
Do have any settings for elegoo mars ultra 5 or saturn 4 16 k you know these printers are tilting only
ابراهيم كريم حسين
2025-05-28 10:35:26 +0000 UTCAwesome to see the printer settings in the description. Model looks sick!
SurprisedRedPanda
2025-02-18 15:41:59 +0000 UTC
