Cat Princess Peach

September Premium Model #1

You can now purchase this model in my Patreon shop!

Current Premium Pass members can receive 20% off this model.

Note: If you were previously subscribed during September 5th-October 4th and need access to this model please message me and I will be happy to send it to you.

You can't have Mario without Princess Peach, and it’s even better when Peach is dressed in a cat outfit! I must say, at first I didnt think I was gonna be able to split the pink and white body the way I wanted, but after some experimentation, it came out exactly the way I wanted, and now I'm very excited to share her with you all you!

Dimensions:

• Cat Peach stands approximately 6.5 inches (165mm) tall at 100% scale. Scaling up should be fine, but if you plan to scale down, be cautious: the eyelashes may become very thin and the eye parts tight. For best results, use a 0.2mm nozzle.

Colors Used:

• Elegoo: Matte White, Matte Black, Pink, Red, Yellow, Sky Blue (eyes)

• Elegoo PLA Pro: Light Blue (earrings)

• Geeetech: Gold

• Duramic 3D: Light Brown

• Creality Hyper Series: Skin

Printing Tips:

• Apply a glue stick to the print bed for better adhesion.

• Supports: Required for the hair, pink body, white body, pink hoodie, white hoodie, hands, and eyelashes.

• Rafts: Use for the lips, tail, left foot spot, right hand spot, pink body, black eyes, and eyebrows.

• Nozzle: For the best quality, use a 0.2mm nozzle for the eyelashes. A 0.4mm nozzle can be used but may result in stringing.

Assembly Tips:

• The pink ears are marked for L (left) and R (right).

• The right foot spot has an arrow pointing forward; this face goes into the foot.

• Handle the eyelashes carefully, as they are thin and prone to damage.

• If using silk filament for the crown, be cautious; it can be brittle and snap easily. The crown has an arrow on the bottom that should point forward.

Assembly Steps:

• Insert the right and left pink spots into the feet, ensuring the arrow on the right spot points forward.

• Slide the white body into the pink body.

• Insert the pink spot into the right hand, then attach the hands to the body using the pins.

• Glue the white and pink hoodie pieces together with the square pin.

• Assemble the eyes by using the correct L and R pieces. Align the blue part with the white eye, then insert the black eye pieces.

• Carefully insert the black eyelashes into the face, then insert the completed eyes.

• Glue the hair and face into the hoodie, then attach the side yellow hair pieces.

• Insert the blue earrings.

• Glue the red gems onto the crown, then snap the crown onto the head, aligning the arrow forward.

• Glue the white and pink ear pieces into place.

• Insert the head pin, with the solid part into the body and the clip into the head.

Congratulations on assembling your Cat Princess Peach! I hope you enjoyed printing and building this model. Thank you all for your support—enjoy!