Hammer Bros.

November Premium Model #2

You can now purchase this model in my Patreon shop!

Current Premium Pass members can receive 20% off this model.

Note: If you were previously subscribed during November 5th-December 4th and need access to this model please message me and I will be happy to send it to you.

Meet the Hammer Bros., the iconic turtle warrior from the Mario universe! With their gladiator helmets and hefty hammers, these fierce foes are ready to challenge any hero. This 3D model captures their menacing pose as they prepare to hurl their hammers. Get ready to dodge, because these relentless enemies are a true test of skill!

Dimensions:

• Hammer Bro stands just about 6.25 inches (158mm) tall at 100% scale, designed to match all the other Mario characters for download. You can scale the model up but scaling down may make some parts hard to fit.

Colors Used:

• Elegoo: Yellow, Sky Blue, Beige,

• Elegoo PLA Pro: Green

• Bambu Basic: Black

• Bambu Matte: Dark Brown

• Esun: Gold (not shiny) (Dark Yellow) for the skin

• Sunlu: Burlywood

   

Printing Tips:

• Supports: Please refer to the print settings picture.

Assembly Tips:

• For additional assistance, refer to the pictures in the download folder for hammer assembly.

• There are two hammer straps, labeled 1 and 2. Strap 1 has one dot on the inside, while strap 2 has two dots. Begin with strap 1, ensuring the dot is at the top. Then, slide strap 2 over it with the two dots also at the top, leaving an opening for the hammer stick to attach.

• When attaching the helmet strap, press it in fully and center it properly.

• Pay close attention to the small black dots for the green helmet, as they are slightly shaped differently.

• For the larger black spots on the sides of the white helmet, note that the angled cut represents the bottom of the spot.

• The bottom of the shoes is labeled L (left) and R (right), and the left and right white side helmet pieces are also labeled L and R.

   

Assembly Steps:

• Glue the white shell to the beige body.

• Once dry, glue the legs into the body.

• Attach the soles to the shoes.

• Glue the shoes onto the legs.

• Glue in the arms.

• Attach all the green shell spots, as each fits in its unique location. Insert all the small green spots.

• Insert the helmet strap into the head, ensuring it is centered and pressed in all the way.

• Firmly press the head into the white helmet until it snaps in tight.

• Glue on the green side helmet pieces.

• Insert the small black dots to the green helmet.

• Glue on the side white helmet pieces, following the L and R labels on the bottom.

• Insert the black spots into the white helmet sides, ensuring the angled cut is at the bottom.

• Assemble the eyes, paying attention to the left and right pieces, then glue them in.

• Glue on the mouth.

• Build the hammer according to the directions, then slide it into the hand.

Congratulations on completing your 3D model of the Hammer Bros.! You've perfectly captured this iconic Mario character, and your model is sure to impress. Enjoy showcasing your work!

 As always, happy printing and thank you for all your support!