May release link (Expired)
Added 2020-05-04 08:26:39 +0000 UTCPRE-SUPPORTED CHAMELEONS UPLOADED!
You'll find two folders.
- Pre-supported test. You will find the heroes Cipactli and the Hero Kuaxotl ready to print in one piece. We've put them up for free so you can give us your opinion.
- No supports. The files are cut up like last month. They need supports, but they can be modified more easily.
Here you can find all the files of our May release:
The models for May are:
- 5x Kuaxotl with blowpipe
- Hero Kuaxotl with Arch
- 3x Cipactli with Heavy Weapon
- Tlaloc, the Osprey
Monthly objective (UNLOCKED):
-Kuaxotl hero on Gallillimus
Thanks a lot for your comments and support!
-------------------------------------------------------------------------------------
Encontrarás dos carpetas.
- Pre-supported test. Encontrará a los héroes Cipactli y Kuaxotl listos para imprimir en una sola pieza. Los hemos puesto gratis para que pueda darnos su opinión. Si todo está bien, haremos el resto de los modelos y crearemos el nivel de Pre-supported.
- No supports. Los archivos están cortados como el mes pasado. Necesitan soportes, pero pueden ser modificados más fácilmente.
Aquí puedes encontrar todos los archivos de nuestro lanzamiento de mayo:
Los modelos de mayo son:
- 5x Kuaxotl con cerbatana
- El héroe Kuaxotl con arco
- 3x Cipactli con Arma Pesada
- Tlaloc, the Osprey
Objetivo mensual (DESBLOQUEADO):
Si llegamos a 450 patrons durante este mes añadiremos un héroe montado ;)
-Héroe Kuaxotl en Gallillimus (aún no está preparado)
Muchas gracias por vuestros comentarios y apoyo!
Comments
Buenos dias, ¿Podría darme un enlace para cargar estos archivos? Gracias de antemano Atentamente
Tocard Tank
2021-09-05 23:59:12 +0000 UTCThese were the May release. Past models would be available in our online store probably today ;)
Adrián Perez-Montejano Jimenez
2020-09-09 07:06:17 +0000 UTCLink does not exist? I joined for these
Viktor Sorscha
2020-09-08 20:52:29 +0000 UTCLos modelos pasados estarán disponibles en la tienda online. Actualmente estamos trabajando en una nueva, pero estará disponible en unas pocas semanas ;)
Adrián Perez-Montejano Jimenez
2020-07-20 08:41:52 +0000 UTChola link caido
Alberto Gil Llluch
2020-07-19 10:53:06 +0000 UTCAnyway to get access to these, or the opportunity has come and gone?
Aaron Riutta
2020-07-19 08:01:34 +0000 UTCthe link doesn't work :/
Rom MAILLARD
2020-07-08 12:15:47 +0000 UTCHello,
Rom MAILLARD
2020-07-08 12:15:38 +0000 UTCWasn't here in may, where can I get those ?
Thibault Gandia
2020-06-30 10:43:27 +0000 UTCAlso interested in how to get the older models. These dudes are killer.
Denis Maddalena
2020-06-28 02:39:46 +0000 UTCHello, same than MrOkay212.
Popom
2020-06-23 15:43:38 +0000 UTCI'm wanting to build a seraphon army and these are lovely. Even if they are not available through patreon subscription anymore, is there a way to pay for the files? This would extend to May's release as well for me.
MrOkay1212 .
2020-06-23 14:35:14 +0000 UTCWhole reason i signed up was because the 10 euro description still said these were available. Are they?
bob mighty
2020-06-15 23:33:33 +0000 UTCLink is broken pls help me
christian bellandi
2020-06-15 22:34:38 +0000 UTCMuy buenas! En la página de descarga me aparece como que no existe el link!
William A. Harold Pérez
2020-06-11 13:08:23 +0000 UTCWill these files be available for purchase somewhere if I didn't start supporting the patreon until June? Would love to have these!
Keely mills
2020-06-10 20:30:46 +0000 UTCAny word on getting access to the May files? I was only able to download one of them before the link went dead. Would really like to get them printed up!
Jamie Evins
2020-06-09 19:59:59 +0000 UTCLink still down. I got the original pack, but didn't get the gallimimus hero or the pre-supported versions. Would be a shame to miss out due to timing.
Shannan
2020-06-06 11:08:45 +0000 UTCI'm sad to say I also joined in May but didn't realize the download link would expire. I only got a 3d printer 2 days ago, so now I'm hoping to download my Cuetzpal and print some minis. The welcome box lizard lord went well by the way. I just hope they let all the patrons who paid for May but missed the download access it soon.
Kroq-Gar
2020-06-06 01:40:47 +0000 UTCResolved. :)
Christopher Bell
2020-06-05 17:24:07 +0000 UTChey, i cannot access the may link. this particular release is what sold me on becoming a patreon.
Neoma
2020-06-04 23:00:06 +0000 UTCThey took the link down and now they're not responding...
Christopher Bell
2020-06-03 18:21:31 +0000 UTCI can't access to the May Release link. Has the link changed?
Grossman
2020-06-03 17:51:08 +0000 UTCDoes the link not work anymore? I joined today and was hoping to get may's before it was too late. I got the link from the email but get an error.
Daniel Rasnick
2020-06-02 22:42:32 +0000 UTCHi! same as Jamie probably, just subscribed today, any possibilities for the may releases? thanks in advance!
thellier tommy
2020-06-01 17:38:16 +0000 UTCI downloaded a couple of the files to test when I signed up, but I also went to download the rest of the May files today, and the link is gone. I subscribed weeks ago. Any chance I could get the link to the files, so I can get the rest of them? In the future, I'll know you're planning to take all the files down at the end of each month...
Christopher Bell
2020-06-01 17:23:05 +0000 UTCI'm new to 3D printing. I'm trying the pre-supported Cipactli unit and they keep falling off the supports. Can I ask what printer you're using?
Alex Cheng
2020-06-01 16:46:17 +0000 UTCWe were using Prusa Slicer at first, now we are using Chitubox ;)
Adrián Perez-Montejano Jimenez
2020-06-01 14:26:05 +0000 UTCRemind to us tomorrow please. Because today is payday and if we check your account it seems you entered in June, so tomorrow we will be able to see more ;)
Adrián Perez-Montejano Jimenez
2020-06-01 14:25:17 +0000 UTCJust subscribed for the May release, but when I click the link to download the files it says it doesn't exist. Any help? The link was working earlier for me.
Jamie Evins
2020-06-01 12:00:35 +0000 UTCLKM, to free your creative genius, please consider doing a special fantasy race/army/collection (December?) once per year (not conventional 9th Age concepts) based on a poll (e.g., Spanish conquistadors - great adversaries for the Cuetzpal Empire, Persians and their monsters from the movie "300", titans, winged dragonmen, Fimir, Araby models, giants, zombie pirates, or whatever inspires you and your patrons).
War Mammoth
2020-05-29 01:09:41 +0000 UTCCongrats LKM on hitting 700 patrons before the end of May! Patrons, good job on promoting LKM!
War Mammoth
2020-05-29 00:50:24 +0000 UTCI printed the suppported - 3x Cipactli with Heavy Weapon andTlaloc, the Osprey with no problems (except for the horizontal base for Tlaloc--I reprinted with the vertical). I do heavy exposure (90) for the base layers and that works well for me in my climate, which may be improving the performance of the supports. Working on Chameleons now. I am almost certain that LKM will release all of the Seraphon plus new ones over time (like when we hit 700 Patrons for June!) (except for those offered during their recent awesome kickstarter because they did indicate that Patreon and KS models wouldn't cross over).
War Mammoth
2020-05-27 19:10:21 +0000 UTCYou and me both :’( I am hoping they release all of the Seraphon models over time.
Houston Taylor Bush
2020-05-27 12:56:10 +0000 UTCI have missed the Kickstarter and i have visited yout HP, and there are lots of other awesome miniatures. Will the also be available as download in the future?
Rainer Engerth
2020-05-27 07:18:06 +0000 UTCi think your supports are a little light. what are you guys using for supporting the models?
Fang & Claw Hobbies
2020-05-27 03:44:15 +0000 UTCare all the models pre supported now or just a couple?
Fang & Claw Hobbies
2020-05-26 18:11:18 +0000 UTCYou need to descompress them first. You can use WinZip/WinRar or an online program like this one: https://extract.me/es/
Adrián Perez-Montejano Jimenez
2020-05-20 06:58:00 +0000 UTCTried on 2 different computers and my phone. All of the pre-supported files except the chameleon unit are corrupt and won't un-rar/un-zip
Steve Holt
2020-05-19 18:10:27 +0000 UTCI can only get the chameleon unit to work. Every other pre-supported file says: "the archive is either in unknown format or damaged"
Steve Holt
2020-05-19 17:05:32 +0000 UTCThank you! Done ;)
Adrián Perez-Montejano Jimenez
2020-05-19 16:40:53 +0000 UTCJust reminding you to change the spanish version "link" and password :D cheers
Mario Rodrigo Cespedes Nogales
2020-05-19 12:40:04 +0000 UTCThey'll be free!
Game kNight
2020-05-18 14:02:37 +0000 UTCI am glad you give supported and unsupported models.
Miniature Player
2020-05-17 18:06:11 +0000 UTCi love the models you sculpt but my only comment is that by creating a separate a supported tier may cause some to drop out, most patrons are giving supported models for free with there standed tiers now adays
Lee Johnson
2020-05-17 17:30:09 +0000 UTCEn primer lugar felicitaros por vuestros diseños. Hacéis un gran trabajo. El añadir los soportes a las miniaturas es un aporte excelente aunque, sinceramente, yo lo ofrecería como un valor añadido al producto. Crear un tier especifico para miniaturas con soporte me parece mala idea. ¿Que porcentaje de usuarios cambiarian de tier para tener soportes? Teniendo en cuenta el precio adicional de esos tiers... ¿Que incremento en los ingresos vais a tener? Un abrazo.
José Antonio Conesa López
2020-05-17 14:20:50 +0000 UTCThanks LK!!
Game kNight
2020-05-17 12:48:32 +0000 UTCYes, they will ;)
Adrián Perez-Montejano Jimenez
2020-05-17 07:33:53 +0000 UTCNo matter why you came here. We can't release every month models to make everyone happy. You already have a lot of Saurians...give the rest of people a chance to get the models they dream with ;)
Adrián Perez-Montejano Jimenez
2020-05-17 07:32:10 +0000 UTCI second this! These are the best supports ive worked with. i'd love to have all STLs supported!
ross rodman
2020-05-17 04:17:44 +0000 UTCOMG your support game is on point! just did 2 of the Cipactli models and the support removal and clean up process was the best experience I have had in the resin 3d printing! if all your supports turn out this well count me in as a life time patron, please teach me your magical ways! keep up the good work!
Karl Combs
2020-05-17 04:02:43 +0000 UTCCan I suggest that you run a smaller poll asking all patreons what they would like to see and what they are here for. the options would go something like this. Saurians. Infernal dwarves. Other. (All other factions Ie: elves, undying dynasties etc.) A Mix/It doesn't matter.
Nazqua
2020-05-16 22:46:17 +0000 UTCWill we get the Kuaxotl as presupported models, too? I want to print a set of those and don't want to "waste" my time supporting them if you intend to give us those this month, too ;)
LiBa
2020-05-15 08:49:59 +0000 UTCUnder the 'no supports' folder :)
Game kNight
2020-05-12 17:33:25 +0000 UTCPinned! Perfect! :)
Game kNight
2020-05-12 17:30:03 +0000 UTCThe Chameleon Skinks don’t seem to be in the pack? Am I looking in the wrong place?
Lionel Miranda
2020-05-11 22:08:50 +0000 UTCI really appreciate the pre-supported models. The kuaxotl hero came out perfect except the end of his tail, it just stopped half-way through the final curl. Thankfully the tail from the separate file was easy enough to support and print. Would you consider pre-supporting the welcome box models? I personally have had a lot of failures trying to properly support and print the forest guardian and it's associated pieces for example.
Daniel Rachels
2020-05-08 19:40:52 +0000 UTCtanto el link como la contraseña en el apartado en español no están actualizados! opino la verdad que los archivos con extension .rar son un error. era mucho más cómodo y apropiado los archivos .stl como se venían subiendo hasta la fecha.
Luis Alvarez Salvado
2020-05-08 10:49:53 +0000 UTCWorking on everything you said. Thanks a lot for the feedback. Wich format would be fine to add or change supports?
Adrián Perez-Montejano Jimenez
2020-05-08 08:50:23 +0000 UTCSome more feedback regarding your supported models: I tried to print both Cipactli 1 and 2 and unfortunately, not a single piece came out fine :( I am curious to see whether others encounter similar issues, and it might be due to my printer settings, even though I tried to print "careful" and slowly. For number 1, the tail is not supported sufficiently, as well as the handle of the weapon (where the left arm grabs it), while for number 2, the right leg is causing issues and both arms failed entirely - due to the orientation of the left arm, it prints a whole lot material at once in the lower layers and there are not enough (or not thick enough) supports to resist the suction, even when moving up at only 1.5mm/s. Right arm has a similar problem for me, and more/thicker supports should do the trick. Do you plan to release the supported files in a different format than stl? Due to the format, the supports are regarded like a piece of the model and it makes it hard to navigate through and place further supports where needed (parameters of the existing ones cannot be changed, either).
Patrick
2020-05-08 08:42:01 +0000 UTCthe Cipactli hero is AMAZING!
Nicholas Brennan
2020-05-08 01:25:18 +0000 UTCHello. You need to download the winrar program to unzip them. Then they'll be normal stl files.
Myca Vykos
2020-05-07 22:19:21 +0000 UTCIs anyone else having issues with the pre-supported Cipactli models? I think it's because they're RAR files instead of STL, but I can't open them on my laptop and I was just curious if i was missing something
Andy
2020-05-07 22:10:35 +0000 UTCWorking on it. New cipactli models are already separate ;)
Adrián Perez-Montejano Jimenez
2020-05-07 17:22:55 +0000 UTCChipactli unit models uploaded?? Cool!!
Game kNight
2020-05-07 15:19:35 +0000 UTCI would recommend that presupported models that are in many parts could be in different files
Sagorath
2020-05-07 14:04:42 +0000 UTCWill you support all the other guys from this month? Or from next month?
Gabriel García Hernando
2020-05-07 07:22:44 +0000 UTCJust finished my print of the big boi. He printed very well, and supports came off super easy in hot water. I did have to scale him down to fit him on the plate for my photon however. Separate files would help greatly with this, and I'll give the other one a print tonight. Are you planning on the pre support being a whole separate tier?
Michael Upchurch
2020-05-07 00:27:11 +0000 UTCHello LK Miniatures, I will release my experience of your two presupported models. The big guy printed very well and I didn't see any major problem on it. It means that if some islands remains, they don't affect the general quality of the model. For the chameleon, two errors appear and I see them on the previous comments. The bigger one is at the end of the tail, one support is missing. This part can not been used. The second is a smaller one and affect the left leg, which is not perfectly printed and a bit flat. About my settings, I use an elegoo mars with 25 micron layer height and I scale it down at 85% for the two models. As a personnal overview, it is very pleasant to have the possibility of presupported models. The supports are very fine and easy to remove. The raft made by prusa is impossible to remove easily, some adjustements must be made for it and I see a previous comments which spoke about that. The fact that all the parts are inside one files make it difficult to preint in case of failure. I think that separate the files could be better, and have the possibility to modify your supports or adding some by having the chitubox files (or prusa equivalent) may be awesome. Stay on this way ! You make good work ! EDIT : After checked the models carefully, the big boy have a small problem below the tail at the middle. May be cause by a bad print or the supports, I cannot assure this point. The overall looking is great and I will kept the print and paint it. For the chameleon, I see two others problems. One one the body part at the right arm which is not printed well. The second on the bow for the right arm too which is completely not printed. For me this is due to the supports. This model cannot be kept or paint because the right arm doesn't be assembled.
Toulouzan Alexis
2020-05-06 07:27:37 +0000 UTCcan you include pictures of the models by themselves
Dylan castillo
2020-05-06 01:39:26 +0000 UTCI have already printed the presupported Tlaloc the Osprey, I am absolutely amazed with the details of the mouth, he bit me! Are you going to presupport the rest of may and april models? Or will it be from next month?
Gabriel García Hernando
2020-05-05 16:56:14 +0000 UTCCheck the facebook group, pictures of printed models using the pre-supported files were uploaded there
Game kNight
2020-05-05 13:27:41 +0000 UTCI have the command group, the models are amazing!
Game kNight
2020-05-05 13:26:00 +0000 UTCThanks for this!
Game kNight
2020-05-05 13:24:55 +0000 UTCEach month the previous models are changed for the new ones. If we keep every month files, patrons joining at the end of the year would get all files and that's not fair. So you have to download every month release during that month. If you didn't do it, send a PM to us ;)
Adrián Perez-Montejano Jimenez
2020-05-05 08:29:09 +0000 UTCI don't see April Release in this link.
Khadath
2020-05-05 08:25:28 +0000 UTCPodías decir qué parámetros has usado? Escalaste las miniaturas? Espesor de capa, tiempo de exposición, etc Gracias de antemano
Luis Alvarez Salvado
2020-05-05 06:58:20 +0000 UTCBuenas, Las miniaturas que habeis creado con los soportes listas para imprimir las he probado en mi impresora 3d de resina mars y han quedado geniales,todo acierto esa modalidad de archivo,os felicito y doi las gracias por estas minis que habéis diseñado para la comunidad👏👏👏👏
Francisco González Hernández
2020-05-05 06:26:59 +0000 UTCBig guy printed out beautifully. Support removal was much easier than for the Chameleon - I assume due to the bigger parts I worried less about breaking some parts of the model :) I reduced the exposure time and upped the movement speed a bit but the print came out nicely. I guess the "base" was arranged in the way it is due to space issues and to ensure all model parts fit onto the build plate, but when provided as separately supported files, I would suggest to rotate it so that the supports are mainly on the bottom part which won't be seen when the model's assembled. Looking forward to the other models as supported versions so that I can continue to experiment with printer settings for your supports.
Patrick
2020-05-05 05:48:05 +0000 UTCNot sure what your remaining settings are - but maybe you want to try reducing the movement speed. Tweaking those values has solved most fail issues for me.
Patrick
2020-05-05 05:41:01 +0000 UTCGotta scale him to fit the plate :D
Game kNight
2020-05-04 23:20:24 +0000 UTCGreat job, for pre-support, I print the Chameleon Hero and I fail the print of tail, I have not the key. Layer 0.03mm on anycubic photon with elegoo water resin. I would like all models with pre-supports ;-) I change my tier next month ;-)
BERT
2020-05-04 21:41:22 +0000 UTChad a little fail the chameleon hero left leg didn't print no worries but perhaps separate so like my example I can print just the model rather than everything again. But everything else printed okay Another thing i would like to see just my opinion is make the raft a little thicker and also add a wall slope
Dylan castillo
2020-05-04 21:41:16 +0000 UTCReally waiting for EZOCAMATL guys. Im truly in dire need of them! :(
SwoodMadden
2020-05-04 19:39:40 +0000 UTCHad a fail here with the big guy, phrozen sonic mini. whole model was just outside of the safety point of my build plate with no scaling. Wanted to attempt it to see if it would print anyway.
Jacob Stacey
2020-05-04 19:25:24 +0000 UTCIt seems fair to me hahaha I will upload the pictures tomorrow ;)
Adrián Perez-Montejano Jimenez
2020-05-04 18:45:08 +0000 UTCI think we would enjoy having the renders of every model with the names so we don't have to open each single one to discover what do we have. The Nahuatl-like language you are using to name the models and species makes it really hard to remember!
Gabriel García Hernando
2020-05-04 18:43:59 +0000 UTCBecause the link is changed every day to avoid others to share it. Check the current link in the post ;)
Adrián Perez-Montejano Jimenez
2020-05-04 18:19:17 +0000 UTCWhen I go to the link through my email it says "400 Link does not exsist"
Sinarai Paints
2020-05-04 18:07:15 +0000 UTCWe will check it! Thanks a lot :)
Adrián Perez-Montejano Jimenez
2020-05-04 17:40:57 +0000 UTCYour comment was very useful, as I think it reflects exactly the idea of this tier. It's mainly intended for people who are just starting out or don't want to worry too much about settings. The models cut up without supports will always be there (cheaper) so that the experts in the field get the best quality possible
Adrián Perez-Montejano Jimenez
2020-05-04 17:40:41 +0000 UTCOne tip for the pre-supported files: I see they're made with Prusaslicer - set the Pad settings to have 45degree Wall Slope, and 1.5mm pad wall height. That will make it much easier to get the raft off of the build plate.
Richard van Schaik
2020-05-04 17:16:02 +0000 UTCi got one printing it looks clean i check a fee
Dylan castillo
2020-05-04 17:03:08 +0000 UTCI agree with the other comments above: Would be great to have the files individually for the parts. Furthermore, if you would upload not only the stl files, but e.g. the Chitubox files, it would allow to also make individual adjustments to the supports. I have just printed the Chameloeon guy and would love to make some adjustments. The print worked fine (Photon; .04 mm layer; 7s exposure; 2.5mm/s retract/lift), but it was quite hard to remove the supports. They seem to be placed quite "conservatively", which is great as I believe that it will be hard to get failed results. Me personally, I would prefer smaller contact points and/or lower contact depths, as this would allow easier support removal and less marks on the model itself. Given that more often than not you can read complaints about failed prints with pre-supported models, I think you are on the right track here ;) Maybe just a tad lighter would be ideal... :) Now I'll try the big guy :)
Patrick
2020-05-04 16:14:32 +0000 UTCHave the pre-supported files been tested? Gonna try and slice them to check for islands :)
Game kNight
2020-05-04 15:48:20 +0000 UTCI also agree with this i think that would be best for everybody
Dylan castillo
2020-05-04 15:24:19 +0000 UTCWould it be possible to get the pre-supported model parts broken out as individual STL files? I can't print the big hero on my plate unless I scale it down. I have also noticed that I'll sometimes have print failures when I try to print using the full plate unless things are positioned in a specific way. If the files are broken out by parts then I can scale things how I want and position them in the best way in order to avoid failures on my machines. Thanks!
Brett Rabatin
2020-05-04 15:15:54 +0000 UTCno single pictures of the model?
Dylan castillo
2020-05-04 14:54:44 +0000 UTCNo sé si seré el único al que le pasa, pero no me va el link a los modelos. Ya está, ahora si he podido acceder a ellos :)
Borja Sierra
2020-05-04 14:38:58 +0000 UTCThank you! I'd love to test, but it will be a couple of months before I can :( I'll jump on the pre-supported tier asap however!
Game kNight
2020-05-04 09:49:13 +0000 UTCGracias por los modelos preso portados! En unas horas los pongo a imprimir! Supongo que habrá que reducirlos al 90% como los archivos anteriores para que queden a la escala adecuada (mismo tamaño) que las enviadas en el Kickstarter
Luis Alvarez Salvado
2020-05-04 09:44:08 +0000 UTCThank you for the presupported models, it is a huge relieve for those that lack experience and nice time saver!
Gabriel García Hernando
2020-05-04 09:17:20 +0000 UTCWaiting for the pre-supported tier, cheer!
Wolf of Meguro
2020-05-04 08:40:59 +0000 UTC
