nightshiftmodeller

Early video

Ma frens, here's the final part of the T-55 weathering! 

Decals on, we're ready for weathering!

Ma frens, Somua is ready for oil paints and some subtle rust effects. Tamiya decals are always very nice to work with and with the use of decal setting solutions you can conform them to pretty gnarly surfaces! Especially the rough turret texture or the lifting hook on the rear of the turret.
...

Well, here's the French camouflage

Ma frens, I managed to up my game and finish more work today! All that's left are decals and a final coat of satin varnish. The model will be then ready for oil paints and other kinds of washes 😁

Trying this multi-layered hairspray chipping effect is certainly interesting, but I think it...

Chipping done, now onto the camouflage

Ma frens, I finished the upper hull chipping and started with the green camouflage patches. I'm purposely going for this bright, happy, vivid look because if French camouflages were so colorful, why don't make the most out of it? 😁 

I found that using an old airbrush needle or somet...

Damn, this injury is making me slow!

Ma frens, I finally started working on the Somua revival! As you can already glimpse, I decided to paint it completely using the hairspray chipping method, even though this one is going to have a rather complex camouflage. The T-55 gave me enough confidence to try it out on a less beaten-up tank!...

HD photos

Ma frens, here's the finished T-55! We'll get back to the urban street diorama when I'm more mobile. Somua project is starting today! 

And the next project will be...

A shelf queen from the shelf of doom! Somua from Tamiya in 1/35th scale... a model which I started in 2016 and never finished, however, I never gave up my hopes! Back then I wanted to be super original and edgy so I went with a dull paint job of an Italian captured tank, but I quickly lost intere...

Not much of a difference, but it's done

Ma frens, things are still a little slow because the discomfort makes me kinda... lazy I'd say? 😁 But the fact I had to perform two of the most boring finishing touches on a model didn't help either - polishing the worn metal edges with a graphite stick and making an antenna from stretched spr...

I'm back!

Ma frens, today I was finally able to have some bench time after... 3 weeks? And it felt good! Well, at first it was REALLY terrifying, because 3 weeks of not modelling are quite a while, and there's nothing worse than jumping back where you left off with an almost finished model. 

The...

HD photos: Nagmachon APC

Sorry for the spam 😁 

Just a quick summary: Hobby Boss kit (very nice kit btw!), Friulmodel tracks for Centurion, Eureka XXL Merkava tow cables and Voyager PE.... and TONS of copper sheet, Evergreen styrene and other materials :) 

SBS: Nagmachon pt. 3

Final part... 177 step-by-step photos in total... And now imagine what level of detail would've been possible with a 3D printer! 

SBS: Nagmachon pt. 2

...continued.... now we're sitting at 121 step-by-step photos... about 50 more to go 😁

SBS: Nagmachon pt.1

My friends, this is my most detailed build ever, and I have so many photos from the building process I'll have to spread it into parts! :) 

THIS is the model which made me rethink my approach to modelling - is it really worth it spending 8 months building a super-detailed model? To a p...

Bonus gallery: Object 279

Just a follow-up to the sheet metal guide... I know I posted these photos here a long time ago, but I didn't tag them which means nobody can find them anymore, so here they are, again 😆 

Just a quick kit summary: this is the Object 279 from Takom with Voyager PE and Masterclub metal...

Bonus: How I metal-cladded the Object 279

Since I didn't post anything the other day and this is a sort of half-build tutorial, here's a simple guide showing how I covered the entire Object 279 hull with pewter foil :) The real tank has a sheet metal "shell" covering the armored cast hull and photos from Kubinka show this shell with lots...

HD photos: T-34/122

Dragon kit of the T-34/76 Mod. 1939 with resin T-34/122 turret from Wilder (OOP), some Friul tracks and Aber PE. I originally bought a set of Modelkasten working tracks for this model but bastards started falling apart before I even started painting the thing 😆

SBS: T-34/122

Ma frens, here's another trip down memory lane. I started painting this model in October 2015 and finished in January 2017. Why such a long time? Because I was painting this one while following along with Adam's awesome weathering series on Youtube where he was painting a KV-1. It was a nice prac...

HD photos: IS-7

Stronk winter tank, enjoy! 😁 

Trumpeter 1/35 kit finished in 2016

IS-7 Step by Step

My friends, it's time for another one from a few years ago, this time from 2016! Trumpeter's IS-7 in 1/35th scale with Voyager photoetch and scratchbuilt side bins from brass sheets - these look like PE, but it's hard scratch work 😁 Back then I didn't know about the benefits of copper which is...

HD photos - Caterpillar D9R

Meng 1/35 kit, finished in early 2014 😊

SBS - Caterpillar D9R

My friends, it's time for another model from the past. This is the Meng 1/35 kit which I finished as a USMC dozer with field-made protective cage (constructed from HESCO barriers in real life). I started building it in late 2013 and finished around April 2014. 

Still heavily influenced...

HD pictures - 3in Gun Carrier

I remember this one being very difficult to photograph because the basic paint job was super glossy and it reflected the 3 IKEA lamps all over the place 😁

3in Gun Carrier SBS

My friends, here's another one, probably my personal favorite :) Finished in 2018

HD Photos - Alkett Minenräumer

So again my friends, MENG kit in 1/35 scale, no aftermarket, very good model, would definitely build it again 😁 This was done in 2012

Aight, I'm gonna show you some models from the past

My friends, after today's visit at the doctor, my movement will be impaired for a little longer (a few days, hopefully - they weren't able to remove my stitches yet). In the meantime, I decided to supply you with "daily" updates from my older projects in form of step-by-step photos, because hey, ...

Best way of adding mortar lines?

My friends, I'm starting to feel much better, but my mobility is still quite limited. But I figured I'd share something every now and then and here's an older "experiment" I did several weeks ago. 

Instead of creating mortar lines between bricks using plaster (the usual "smear it all o...

Finally home and much better!

My frens, it's ya boi again, back at it with another banger! 

I was released from the hospital the other day, but my painkillers quickly wore out and it was... interesting to say the least haha. Today I'm much, much better! Thank you for all your nice comments, although I won't be able...

Some good news

Ma frens, thank you so much for all your positive vibes and well wishes! You must've made a difference on my state because the good doc said I might be released into home therapy tomorrow morning or the day after. And I might be able to walk on my own after only 6 weeks! 

My ankle was ...

Not the greatest news

My friends, I don't have great news for you today. On Saturday, I had a crash on my bike and broke my ankle. I had to be airlifted to the hospital (because paramedics on wheels wouldn't be able to reach me!). Yesterday I had a surgery, because as it turned out, I snapped both bones right above my...

Rubble!

My friends, here's the finished debris and rubble. Now I can go over the tank with enamels and oil paints and refine/adjust all the dust tones, restore lost contrast, etc. 

My phone has been possessed by a potato demon and took really crappy pictures. I don't know if the lens was greas...